DIY, how to build your own cantilever sliding gate (3) – Set the post with 4″ Dia. galvanized pipe by only one man by XuemingPosted onAugust 25, 2015February 25, 2025 DIY, how to build your own cantilever sliding gate (3) – Set the posts using 4″ diameter galvanized pipe by only one man
As far apart as you could. In my case, it is 1/3 of the length of the gate, which is about 6 ft apart.
As far apart as you could. In my case, it is 1/3 of the length of the gate, which is about 6 ft apart.
How far back from your original fence did you set the posts for the cantilever gate? 6″ or a 12″? Thanks for the great writeup!
How far back from your original fence did you set the posts for the cantilever gate? 6″ or a 12″? Thanks for the great writeup!
Hello, great work! How far apart are the 4″ posts?
As far apart as you could. In my case, it is 1/3 of the length of the gate, which is about 6 ft apart.
Hello, great work! How far apart are the 4″ posts?
As far apart as you could. In my case, it is 1/3 of the length of the gate, which is about 6 ft apart.
How far back from your original fence did you set the posts for the cantilever gate? 6″ or a 12″? Thanks for the great writeup!
The gate’s posts are about 6″ away from the fence.
6″ to the center of the post or to the edge?
center
How far back from your original fence did you set the posts for the cantilever gate? 6″ or a 12″? Thanks for the great writeup!
The gate’s posts are about 6″ away from the fence.
6″ to the center of the post or to the edge?
center