There is a wide selection of gate opener products available online or at local shop, The price would range from several hundred dollars to more than a grand. It is really hard to tell…
Gate frame is up, now it’s time to do the electrical work. First of all, I needed to have power on the site! After searching around the house, I decided to…
DIY, how to build your own cantilever sliding gate (5) – Weld the galvanized pipes into a gate frame
Welding was the only worrisome part of this project when I decided to build this cantilever gate because I never welded before, nor do I own a welding machine. And I…
After getting the posts set in the ground, it is time to assemble the gate, according to the plan. The best way to notch galvanized pipe is to use professional pipe notcher,…
After collecting all the necessary materials for my cantilever sliding gate project, it’s the time to start the real work! Let’s begin with setting the post. I chose 4 in.…
After the plan was consolidated , the first thing I needed to do is to purchase the material. With all sorts of hardware stores around, nothing was difficult here except for 2 pieces of galvanized…
In this series of posts, I will show you how to build a cantilever sliding gate from scratch. The picture below shows the before-and-after of my project. I needed to convert…
First of all, please watch the video below to find out how everything was done on my work bench. A recent project requires soldering 600+ tiny LEDs on long narrow…
First of all, let’s see the video of the heated print bed in action! This table is built for Type A Machine 3D printer, but it should works for all…
My reflow oven in action! Although I can skillfully solder as small as 0.5mm pitch QFN package chip by hand (post, video), more and more space saving components appearing on the…